6
Delice UL
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Mixer doesn't turn
Drive shaft coupling not cor-
rect
Check that it's in the cor-
rect operating position
Drive shaft coupling broken
Replace mixer and/or drive
shaft
Gear motor not working
See “Gear motor doesn't
turn”
Electrical wires disconnected
or interrupted
Connect or replace
electrical wires
Product too dense
Dilute the product
Gear motor doesn't turn
Motor overheated: “Thermal
Protection” tripped
Check the voltage of the
outlet. Check the
ventilation (fins on the side
panels obstructed or lower
part of the distributor
obstructed). Check the
viscosity of the product
Stator winding burned out or
interrupted
Replace the motor
Rotor shifted
Check the alignment of the
rotor bearings
Gears in the reducer box
damaged or worn
Replace the motor
Beverage leaks from the
container
Container gasket seal broken
or worn
Replace gasket seal
Tap piston o-ring broken or
worn
Replace the piston o-ring
Tap piston not in closed posi-
tion
Check the tap lever or
spring and replace the
worn part
