UGO BASILE 47650, Instruction Manual

Page: 29 / 39

Page 23
47650 Instruction Manual (Rev. 2.1)
Pins 14-15 GROUND
(*) The following picture shows the correlation between RPM and Volt on Pin8:
IMPORTANT :
Please note the TTL output is not real-time. Maximum delay: 200ms.
6
MAINTENANCE
While any service of the instrument ought to be carried out by Ugo Basile personnel or by
qualified personnel authorized by UGO BASILE organization, this manual section
describes normal maintenance procedures which can be carried out at your facility.
UNPLUG THE MAINS CORD BEFORE CARRYING OUT ANY
MAINTENANCE JOB!
6.1 Electrical
To inspect and/or replace the fuses, disconnect the mains cable first! Insert a
miniature screwdriver in the slot indentation, see paragraph 3.5.2, and snap out the slide
which houses the fuses. Use T2A fuses for operation at both 230 or 115 Volts.
Snap in the fuse slide: the mechanical “
click
” ensures that it is locked.
6.2 Cleaning
Rota-Rod 47650 does not require any maintenance apart from normal cleaning.
Do not use organic solutions , liable to impair the discs and the acrylic
components and touch-pad.
Cotton wool and water can be used for cleaning purposes. For disinfection,
use a non-alcoholic disinfectant, or H
2
O
2
.