Page 14
47200 Instruction Manual (Rev. 1)
The current selection is indicated by the underlining,
in our example 500gf.
Change the setting by pressing
Change
, and con-
firm with
OK
, or
Exit
, if don’t wish to modify the cur-
rent selection.
4.4.5
Memory Status
It is possible to check the current status of the internal memory (the remaining space and
number of tests), by selecting
Memory Status
from the Measure menu:
This example indicates that
75.4%
of GSM’s data
memory is
available
to store further measurements.
The estimate of
>547
for
Tests left
is based on the
assumption that future measurements will be similar
in length to those already stored; in fact, the number
of tests that can be stored, depends on the duration
of each test.
Press
Back
to return to the first option in the
Measure
menu.
4.4.6
Erase Memory
Selecting the option Erase Memory from the Meas-
ure menu displays:
Press
Confirm
if it is your intention to
erase all the data
stored in the memory. The con-
figuration settings will not be changed.
Press
Cancel
to return to the start of the
Measure
menu, without cancelling the data.
The
Erase Memory
option is offered automatically after data are transferred to the PC.
4.4.7
Back to Main Menu
Press
Next option
until you reach any option (ex-
cept Measure Peak Force), then press
Exit
to return
to the
Main Menu
.
