Page 10
47200 Instruction Manual (Rev. 1)
N O T E
:
If the GSM does not behave as described,
please repeat all the steps.
If the problem remains, charge the internal
battery and reset the GSM manually by
pressing with a needle into the small
reset
hole located to the right of the display.
For further assistance, please contact Ugo Basile, see paragraph 7.3-Customer Support.
4.2
Routine Operation of the Instrument
4.2.1
Turning the instrument ON / OFF
The Grip Strength Meter is turned
ON
from the OFF state, by
pressing the
ON/OFF
button.
The same ON/OFF button turns the GSM OFF from most display
screens.
4.2.2
Menu Operation
The GSM is operated through a number of menus by pressing the three
soft buttons
,
F1, F2 and F3 below the display. The current functions of these
soft buttons
are indicat-
ed by the lower line/lines of the display. The upper line shows the current option.
Here’s a typical display in the
Measure
menu:
The user steps through the available options by
pressing
Next option
and then selects the required
option by pressing
Select this
.
4.3
Main Menu
The
Main Menu
is the first menu which appears when GSM is switched
ON.
Pressing
Measure
leads to the menu of options re-
lating to measurements and data transfer to the PC.
Configure
menu allows the user to adjust a number
of parameters to suit particular measurement re-
quirements and includes an option to restore the
factory default values for these parameters.
ON / OFF
