Ugin e.ON sinter fast, Instructions For Use Manual

Page: 8 / 27

Instructions for use (rev 011221) e.ON sinter fast +
UGIN DENTAIRE 7
3.2. CONDITIONS OF USE, TRANSPORT AND STORAGE
▪
Authorised conditions of use
- Ambient temperature: +10°C to +40°C.
- Humidity range: maximum relative humidity 80% for temperatures until 31°C, without condensation
and decrease linear until 50% to 40°C, without condensation.
- Ambient pressure: up to an altitude of 2000 m above sea level.
▪
Authorised conditions of storage
- Ambient temperature: -20°C to +65°C.
- Humidity range: maximum relative humidity 80%.
- Ambient pressure: up to an altitude of 2000 m above sea level.
▪
Conditions to transport
- Wait the complete cooling before packing/transporting.
- Use the original packaging only, with the protective elements (polystyrene...).
- Take hold the furnace by its base, never lift by upper part of furnace.
-
For transport, the furnace must remain in an upright position: not horizontal position.
- Install the furnace in the packaging with the protective elements. Also protect the accessories for
transportation.
- During transport, do not leave moving parts (including accessories and support) in the chamber that
could damage the rods.
NEVER LIFT BY UPPER PART OF FURNACE : risk material damage.
For transport, the furnace must remain in an upright position: NOT HORIZONTAL POSITION.
Heating elements may be damaged in horizontal position due to vibration/shock.
3.3. ACCESSORIES
▪
Accessories delivered with the furnace (included in the packaging):
ACCESSORIES QUANTITY UGIN CODE
- Tray for sinterizing 2 FCE07SIN0030
- Tray for sinterizing cover 1 FCE07SIN0023
- Box of zirconia pearls 1 FCE03SIN0001
- Support
(two parts: base and additional raise support)
1 FCE07SIN0015
- Wrench 1 ---
- Allen wrench (number 3 and 4) 2 ---
- Exhaust pipe 1