![UFSK 500 ECO User And Service Manual Download Page 9](http://html1.mh-extra.com/html/ufsk/500-eco/500-eco_user-and-service-manual_3240233009.webp)
500 ECO
Manual_500 ECO_SN0001-following_0520
www.ufsk-osys.com
User and Service Manual
Page 9 of 50
• Keep moisture away from live components. Moisture may cause short-circuits.
• Never use damaged cables or plugs or loose wall outlets.
• Do not put the chair into or out of operation by plugging or unplugging the mains connection cable.
• Never touch cables with moist hands and do not pull on them.
• Cables must never be bent or otherwise damaged.
• Electrical components like the manual keypad or foot keypad should be pre-cleaned with a dry cloth and
subsequently disinfected with a moderately moist cloth saturated with an appropriate disinfectant.
• Neither the treatment chair nor its accessories are suitable for cleaning in automated systems (e.g. Jetstream).
Warning
Prevention of electromagnetic interferences in environments characterized by the controlling of radiated
high-frequency disturbances.
During emergency situations requiring the use of a defibrillator it is important to refrain from operating the treatment
chair’s electrically powered adjusting functions. The chair‘s running motors may interfere with the defibrillator’s
normal operation. Electromagnetic interferences between the devices cannot be ruled out entirely.
•
Switch off the treatment chair and disconnect it from the power supply so that all current flow to the electrical
adjustment functions is safely interrupted.
The same applies to the use of high-frequency surgery equipment! Electromagnetic interferences between these
devices and the treatment chair cannot be ruled out entirely.
• Activating the electrical adjusting functions for positioning the patient during this type of intervention/
treatment is therefore strictly prohibited!
Caution
•
Unauthorized structural alterations by the operators or operating staff are prohibited!
•
Strict adherence to the load limits specified in Section „9. Technical Specifications“
is mandatory.
• When selecting a location for the treatment chair, please pay attention to adequate space for patient
movement while entering or exiting the chair.
Attention
• When using the treatment chair in conjunction with other equipment, please make sure of its compatibility
the treatment chair.
•
The use of this chair in conjunction with devices that emit ionizing radiation (e.g., X-Ray diagnostics,
therapeutic radiology) is prohibited.
• Never push the treatment chair across thresholds or stairs.
• Never use the treatment chair´s armrests as carrying handles.
• Please lift the treatment chair only by the metal frame of the running gear.
Additional specific safety instructions applicable to each of the application situations described have been
incorporated in the relevant paragraphs of this user manual and are identified by the signal words outlined in
Section „1.5.2 Explanations on the signal words used herein“
. Please pay particular attention to the Important
Information contained therein.