Manual_500 ECO_SN0001-following_0520
500 ECO
www.ufsk-osys.com
User and Service Manual
Page 38 of 50
Visual inspection and function check
Type of inspection
Component to be inspected
OK
NOK
Remarks
Visual inspection
of equipment
Nameplate
User manual available
Moving gear
Tilt-free assembly
All connecting elements
Coverings
Upholstery
Visual inspection
of electrical
components
Hand remote control
Foot-operated switch
Condition of all drives
Function check
of drives
Height adjustment
Back, seat and legrest
Armrests
Function check of
manoeuvering aid
Lowering of the castors
Locking
Function check
of the electronics
Control elements
Control system
Overall assessment:
No safety deficiencies or functional deficiencies were found.
No direct risk, the identified defects can be remedied at short notice.
The equipment needs to be taken out of service until remedial of the deficiency!
The equipment does not comply with the relevant requirements / replacement of components /
decommissioning is recommended.
Recommended test cycle for periodic inspections: 12 months
Evaluated by: __________________________________
Date/signature: ___________________________
Inspector
