13
UFO LIGHTING
OPERATION
DMX OPERATION
DECORATIVE TWINKLE WHEEL CONTROL
-
WITH SENSOR
For DMX wheel control DIP switch 10 must be OFF and the XLR plug(s) must be plugged into the
XLR sockets on the side panel.
The light source decorative wheel can be controlled on DMX channel 2 as shown in table C.
Note:
For this configuration of a twinkle wheel with sensor, the wheel is supplied with a cut out
segment. The wheel in motion will give an uninterrupted twinkle by rotating backwards and
forwards either side of the segment. When stop is selected the wheel will come to rest at the
segment giving unobstructed white light output.
LED / FAN CONTROL
For DMX LED and fan control, switch 10 must be off and the XLR plug(s) must be plugged into
the XLR sockets on the side panel.
The light source LED and fan can be controlled on DMX channel 3 as shown in table C.
SIRIUS DMX CHANNELS
-
TABLE C
Each Sirius occupies 3 DMX channels as detailed below.
Channel
Function
Value
Description
1
Dimming
0-255
From off at 0 to bright at 255
2
Twinkle wheel
0
Wheel at stop at cut out
segment giving full white light
2
Twinkle wheel
1-255
Varying backwards and forward
rotation from very slow to
7.5rpm at maximum
3
LED and fan
0-250
LED and fan on
3
LED and fan
251-255
LED and fan off