Nova Light Source Range
6
OPERATION
DMX Mode
In this mode the Light Source (set to DMX) can be controlled either by another
NOVA in Master mode or by a DMX controller.
Nova Remote Controller
Description
Details
Comments
Power
2 X AAA batteries
Range
30 metres
Measured in free space, may be attenuated by
obstructions or other RF devices
Frequency
2.4GHz
Approved for use in UK, Europe and USA
Batteries –
With The LED Light Source powered up as described above, remove the rear
cover on Remote Controller.
Taking care not to touch any of the front cover buttons,
insert the batteries. If you touch the remote control buttons when inserting the batteries it
WILL
effect the operation of your Remote Control. If you do accidentally touch any of the
buttons, remove the batteries and start again.Once the batteries are inserted do not use the
Remote Control for 3 seconds.
Test remote control as detailed on the following page. The Remote Controller is “matched”
to the Light Source at the factory. If the Remote Controller is not matched or and additional
or replacement Remote Controller is required carry out the “Matching Remote to Light
Source” instructions in the following text. If a Remote Controller is to be removed from
control of a Light Source carry out the “Unmatching Remote to Light Source” instructions in
the following text.
DO NOT TOUCH THE
BUTTONS WHILST
INSERTING
BATTERIES
