Universal Fibre Optics
5
OPERATION
Rear Panel Controls
The left hand display shows a rotating line when DMX data is received.
Standalone Master Mode
In this mode the light source (set to Master) can be used in two ways – either
as a single independent light source or in a Master/Slave configuration with
several light sources connected together using DMX cables. The Slave (set to
DMX) will mimic whatever standalone programme the Master Light Source is
set to. All menu functions are available in Master mode.
Note:
for master/slave to operate, both master & slave units must be set to
address 001 only.
Standalone Remote Mode
Again in this mode the light source (set to Remote) can be used in two ways –
either as a single independent light source or in a Master/Slave configuration
with several light sources connected together using DMX cables. The Master
colour sequences are controlled by a RF remote control and again the Slave
will mimic the Master Light Source
