UFO GEMINI Series, User Manual

Page: 4 / 16

INSTALLATION
The light source is powered from a desktop 12V Dc power supply unit.
The power supply unit is an IEc input device and caters for UK/European/other mains supplies
using the relevant power cord.
POWER SUPPLY REQUIREMENTS
There are 2 connections required – the fibre port and the mains supply cable. The fibre port
should be connected first. connect and secure the fibre optic connector into the collar and
secure using the M5 locking screw.
connect the PSU to the Dc input jack socket on the light source, and connect the IEc cable to
the PSU. Plug the mains plug into the electrical supply socket. Switch on power the led
indicator will illuminate and the light source is ready for use. If no light is produced consult the
TROUBLESHOOTING section of this user guide.
Note that these light sources are not mains dimmable.
CONNECTION
-
GEMINI M MODELS ONLY
GEM SLP
-
XXXXM cONNEcTIONS GEM SLP
-
XXXXDMX
/ 10
V cONNEcTIONS
GEMINI USER GUIDE
4