DMX OPERATION
The DMX light sources can be dimmed remotely, can be switched on/off and can be
addressed manually. See table below.
Channel
Function
Value
Description
1
Dimming
0-255
From off at 0 to bright at 255
2
LED and Fan
0-250
LED and Fan ON
2
LED and Fan
251-255
LED and Fan OFF
Gemini
Light Source
Range
6
Unless the address is specified on the Purchase Order, all light sources will be
defaulted to Address 001. Connect the DMX controller to either of the Mini XLR
sockets, and the light sources can now be dimmed. Additional Slave (same address)
DMX Illuminators can be linked together.
To revert a DMX light source to non DMX control or manual operation:
1. Disconnect the light source from the mains supply.
2. Tilt the light source on its side and remove the screw from the base as shown
below.
3. Slide the access cover down to remove and set the cover and screw aside.
4. Switch DIP switch 10 (top) to ON as shown below.
5. Replace access cover and securing screw.
Summary of Contents for GEM SLP-3000M
Page 15: ...Universal Fibre Optics 15...
