5
6
7
with
alc3»
stem
ticles
ately
re to
hold
e the
le or
ping,
until
e the
ping
«anti-
uced
8
s left
After
r the
h the
while
n its
h the
n
9
cally
10
CLEANING 11
ADVICE ON DISPOSAL:
Our goods come in optimised packaging. This
basically consists in using non-contaminating materials
which should be handed over to the local waste
disposal service as secondary raw materials.
This product complies with EU Directive 2002/96/CE.
The crossed wheelie bin symbol shown on the
appliance indicates that when it comes to dispose of
the product it must not be included in with household
refuse. It must be taken to a special refuse collection
point for electric and electronic appliances or returned to the
distributor when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take discarded
appliances to special refuse collection points may be
penalised. Correct disposal of discarded appliances means
that they can be recycled and processed ecologically, helping
the environment and allowing materials used in the product
to be reused. For more information on available waste
disposal schemes contact your local refuse service or the
shop where the product was purchased. Manufacturers and
importers are responsible for ecological recycling, processing
and disposal of products, whether directly or via a public
system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
Problem
Probable cause
Solution
The iron does not heat.
1. Temperature control in very low
position.
2. No mains supply.
1. Turn to a higher position.
2. Check with another appliance or plug the iron
into a different socket.
Display light flashes and only
shows «OFF»
1. Auto shut-off function enabled
move the iron about gently
The clothes tend to stick.
1. Very high temperature.
1. Turn the temperature to a lower temperature.
Water comes out together with
steam.
1. Temperature regulator in very low
position.
2. Steam regulator in very high position
with low temperature.
1. Turn the temperature regulator to a higher
position
2. Turn the steam regulator to a lower position.
Steam does not come out.
1. Steam regulator in closed position.
2. Temperature regulator in very low
position
3. No water in the tank.
4. Obstructed mechanism.
1. Turn the steam regulator to an open steam
position.
2. Turn the temperature regulator to a steam
position
3. Fill the tank.
4. Remove the needle and clean it, if this does not
help, contact the Technical Service.
Spray does not work.
1. No water in the tank.
2. Obstructed mechanism.
1. Fill the tank.
2. Contact the Technical Service.
Water comes out from the
soleplate before connecting
the iron.
1. The steam regulator is not properly
closed.
1. Make sure to place the steam regulator in
position
.
Do not forget to empty the tank when you have
finished ironing.
Smoke comes out when
connecting the iron for the first
time.
1. Lubrication of some of the inner
parts.
1. Do not worry. It will disappear in a short period
of time, after the first usage.