UES AG · Breuerhofstr. 48 · 47807 Krefeld
Tel.: +49 (0) 2151-72950 · Fax: +49 (0) 2151-729578 · [email protected] · www.ues-
ag.net
21
Maintenance
Maintenance
Maintenance
Maintenance
Caution: All work is to be performed only in a voltage-free and
unpressurised state and by qualified personnel.
When performing maintenance work, the following precautions should be observed:
•
Do not conduct any inspection or adjustment work without a second worker being present who
can provide immediate help in the event of an accident!
•
Disconnect the power supply before opening the cabinet or removing the electrical
components!
•
Before performing maintenance work, remove any jewellery, such as rings, watches, necklaces,
bracelets, etc.!
•
If possible, stand with your feet on an insulated rubber carpet and avoid working on wet or
damp floors!
•
Always wear safety glasses, protective gloves and protective clothing that covers those parts of
the body that can be reached by splashes of hot adhesive or that come in contact with hot
parts!
•
Set the operating pressure of the adhesive to zero before performing any work! In addition, the
pump is shut down and drained by opening the application valves of the pressurised adhesive.
•
To clean the spray nozzles, do not use any open flames, sharp objects or needles, because these
could damage the nozzles!
•
If adhesive begins to leak out, stop operation immediately!
•
Only use original spare parts!
Before cleaning, the system should be completely drained and heated up. Hoses and nozzles are only
to be connected or removed when warm.
Never use hard tools to remove the melted adhesive in the tank; this could damage the non-stick
coating.
The cooled hot melt adhesive can normally be easily peeled from the walls of the melting tank.
If necessary, only use a wooden spatula.
The UES TANK SYSTEMS correspond to the state of adhesive technology and have a variety of special
features that simplify daily work with hot glue and contribute to highly reliable production.
