Note:
For point-to-point installation, the line of sight of the 2 wireless bridge
brackets must be clear and cannot pass through the wall. The signal
transmission angle of the bridge is 60 degrees. For point-to-multipoint
installation, the angle of the slave bridge needs to be adjusted to ensure
that it is within the 60-degree signal range of the main bridge. The antenna
polarization direction is horizontal 60°/vertical 30°.
5.WiFi Function
1. The WiFi function is turned on by default for the master bridge.
WiFi SSID: CPE5G-5GXXX
WiFi PWD: zllinkcpe123456XXX
XXX represents different channels, please refer to the comparison table in
the user manual.
2. You can access the wireless bridge through your computer to set the SSID
and new WiFi password. Please refer to the advanced settings section.
3. Connect the PoE adapter PoE to CPE, and LAN to Camera, PC, Router or
Switch based on the network topology. The role of PoE is to provide power
and data transmission for CPE.
4. The master CPE’s PoE adapter’s LAN connection monitors the Internet, and
the slave CPE’s PoE adapter LAN connects cameras or routers and other
equipment.
07
