E450 Wireless Bridge
E Adapter
al Cable Tie
work Cable
r Manual
his wireless bridge is powered
E adapter through a network
, so does not require a DC power
. The DC power adapter and
re not included in the package.
ireless Bridge
ge Included:
Quick Start
1. PoE Power Supply
The CPE820 wireless bridge adopts a PoE power supply, which is easy to install
and manage while saving costs.
1.1. According to the requirements, prepare a long enough network cable
（
Recommended within 20 meters, must Cat 5e or up） to connect the
wireless bridge and the PoE power supply. The PoE port of the PoE power
supply is connected to the WAN port of the wireless bridge.
1.2. The LAN port of the PoE power supply is connected to the PC, router, and
switch.
2. Point to Point Pairing Step:
1. Switch one unit to A(Master Bridge) and one unit to B(Slave Bridge);
2. Connect the POE to each unit using the Ethernet cable and plug the POE in;
3. Wait for them to power up, about 2 min;
4. Use the tiny reset button to click through until you get a channel with a letter.
1,2,3,..., A,B,C,...,F, here used C;
5. Then on the other unit do the same. Both units need to be on the same
channel;
6. Wait for 2-5 minutes to complete the pairing. When the number of the digital
tube is solid and the signal light on the side turns on, it means the pairing is
successful;
7. Finally connect other devices(Router, PC, Switch) and install them to the
target location.
05
