2. Modify your computer's IP address,
make your computer's IP and the
bridge's IP address be on the same
network segment(LAN) so that you
can access them.
Step 1: Find and open "Open Network and Sharing Center" on your computer.
Tips： click the network icon in the lower right corner of the computer.
Step 2：Find and open the "Change adapter settings", select "Local Area
Connection" to right-click to open the network properties. Refer to the
picture above to open.
Step 3: Find and double-click open the "Internet Protocol Version 4(TCP/IPv4)",
choose the " Use the following IP address" and enter IP address, subnet
mask, Default gateway, Preferred DDS server.
3. Change your computer's IP address to 192.168.188.xxx (192.168.188.xxx
cannot be the same as the IP of the CPE), then entry IP address is
192.168.188.xxx, subnet mask is 255.255.255.0(Autofill), Default gateway is
192.168.188.xxx, Preferred DDS server 192.168.188.xxx. You can use
192.168.188.2(xxx=2) in the reference picture to set.
192.168.255.10
5
10
