DIGITAL TERRESTRIAL TERMINAL
USER MANUAL
USING THE MENUS
To use the Menu system:
1
Ensure that the decoder is not in standby mode.
2
Press the MENU button on the RCU. The following Main Menu will be displayed,
which provides access to all other sub-menus as shown below.
When you change values or settings in each of the menus or sub-menus, move
the highlight to “Accept Changes” option and press OK or the changes you made
will not be saved. All the Menus are navigated as follows:
1
Use the or buttons to scroll the highlight bar up or down in a (sub)menu or
vertical list box.
2
Select a highlighted menu option and go one level lower within the menu hierarchy
by pressing OK on the RCU. This applies to the Main Menu screen and all sub
menu screens.
3
Use EXIT to return to the previous menu (go one level higher within the menu
hierarchy).
4
Use or buttons to move the highlight to the option you require. Press OK.
To change any setting or values, first press OK. The area were the values can be
changed becomes WHITE. Use or to change the values. Once the values
have been changed press OK again. Now move the highlight bar to the “Accept
Changes” option and press OK.
5
Use the MENU button to EXIT from all menus and return to TV or Audio programmes.
6
Use numbered buttons on the RCU to enter numeric values.
21
