DIGITAL TERRESTRIAL TERMINAL
USER MANUAL
TELETEXT
Some services may have a Teletext service. This can be selected as follows:
1
With the service selected, press on the RCU. The following message
box is displayed:
NOTE:
The symbol changes to three bars to indicate teletext selected.
2
If Teletext is not available, a “No Teletext” message is displayed.
3
To make teletext transparent press again.
4
To page up or down, press P+ or P- on the RCU. To change to a distant
page, key in the page number using the numeric digits on the RCU and then
press OK.
5
To clear teletext from the screen, press EXIT on the RCU.
SIGNAL SOURCE SELECTION
Switching between signal source devices is automatic by using the UHF button (green
button) on the RCU. To select between the available signal sources, a single press-
release of the UHF button in normal viewing mode (i.e not in the Menu or EPG) switches
to the next source. This is an override selection in that it will switch to VCR even if the
VCR is not playing.
The signal source is indicated on the decoder front panel. The available options are:
Decoder (DTT)
: This allows you to use your Terrestrial services.
VCR
:
This allows you to view a programme from the VCR. Press
play on the VCR to view.
TV
:
If your decoder and TV are connected through SCART, it will
allow analogue terrestrial channels to be viewed on the TV.
18