- 14 -
Mounting the third bicycle
4
The third bicycle is mounted in the same manner as the first.
Note the opposite arrangement of all bicycles.
The third bicycle is attached to the second bicycle with an
additional bracket (4).
Removing bicycles
Bicycles are removed and brackets (2), (3) and (4) released in
reverse order.
Tilting/collapsing the bicycle rack
Tilting the bicycle rack back
The bicycle rack can be tilted back for loading and unloading
the vehicle.
Activate the foot lever (27) and tilt the bicycle rack (1) back by
pulling on the rack (7) or the bicycle frame.
Folding back the bicycle rack
1. Fold back the bicycle rack (1) so that both hooks (28) are fully
engaged and located in the frame (29).
2. Jiggle the bicycle rack (1) to ensure it is seated firmly.
If necessary, tilt back the bicycle rack (1) again and fold back
a second time.
4. Uebler P32-S hitch rack for 3 bicycles
(Order no. 15810)
Attention
Only attach the bracket (4) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such as gear or brake cables.
Faulty clamps must be replaced immediately.
Attention
Slowly tilt the bicycle rack back while ensuring that no persons
or objects are located in the tilting area.
There is a danger of crushing for people and objects in the
tilting area.
Ensure that the bicycle rack fully engages with both hooks and
locks when folded back. Otherwise, the bicycle rack could tilt
back during a trip and result in injury to you or others and/or in
property damage
4
M+P-25A-0157
27
1
7
M+P-25A-0146
1
28
29
28
29
M+P-25A-0126
