C
EN-50
english
Operating the unit
EN-51
english
C
Operating the unit
The measurement being completed is indicated by a long beep. The determined values for
systole, diastole, and pulse are shown on the display.
•
The unit switches off automatically after about 3 minutes.
•
Irregular pulse waves
9.
If the symbol for irregular pulse waves flashes after a measurement, the unit has recorded
irregular pulses during the measurement. This can be set off by an irregular heartbeat (ar-
rhythmia), disturbance caused by movement, talking or even breathing in deeply. The symbol is
stored with the respective measurement.
Using the memory
10.
Measured results are automatically stored in the memory. The memory can store up to 60 results and the average value.
When more than 60 measured values have been stored, the oldest value (No. 60) is deleted to allow the latest value (No.
1) to be recorded.
Recalling data
Press the Memory button to call up data. The average value of the stored results is
displayed with „A“.
When the Memory button is pressed again, the value measured last (No. 1) appears.
Press the Memory button repeatedly to call up further measured values.
When the date/time function is activated, the measured values are displayed alter-
nately with memory number, date and time.
The unit switches itself off automatically 30 seconds after the memory is called up.
The actual measurement takes place with the start of deflation. The “
♥
” symbol in the
display flashes until the pulse frequency is displayed.
•
