C
EN-46
english
Operating the unit
EN-47
english
C
Operating the unit
When the display shows the „Flat battery“ symbol for the
first time, the unit will still have enough charge for about
30 measurements. Please change the batteries during this
period.
Activating and setting the date/time
6.
The unit has a date/time function which you can activate where necessary. This function is deactivated when the unit is
delivered.
Activating the date/time function
To activate the date/time function, press the Start/Stop button and then immediately, while the full display is visible, the
Memory button. This function can be deactivated at any time in the same way.
Setting the date/time
The four-digit number representing the year appears in the display first. Press the Memory
button to set the year. Press the Start/Stop button to confirm the selected year and proceed to
setting the date.
Set the month with the Memory button and confirm this with the
Start/Stop button. Set the day, hours and minutes in the same way.
Changing the date/time
To change the date/time function, take out a battery and wait until
the display goes blank. Now you can reactivate the date/time func-
tion and reset the values.
Deactivating the date/time function
To deactivate the date/time function, press the Start/Stop button and then immediately the Memory button.
When the date/time function is activated, the time is also shown in
the display when the unit is switched off.
