UE Systems ULTRAVIEW Manual Download

Page: 23 / 33

•

Air mode is used for localizing
compressed air leaks.

•

Power mode is used for localizing and
classifying high-voltage and medium-voltage
partial discharges.

If you have a camera that supports both modes, you can change the mode by pressing

Change

mode

4.7.4 ADVANCED SETTINGS

Language

This option allows you to choose the desired user interface language. The following languages are
supported:

CZECH
DANISH
DUTCH
ENGLISH
ESTONIAN
FINNISH
FRENCH
GERMAN
GREEK

HUNGARIAN
INDONESIAN
ITALIAN
JAPANESE
KOREAN
NORWEGIAN
POLISH
PORTUGUESE
RUSSIAN

SIMPLIFIED CHINESE
SPANISH
SWEDISH
THAI
TRADITIONAL
CHINESE
TURKISH
VIETNAMESE

Distance unit

The distance unit can be changed
here to either meters (m) or feet
(ft).

Reset settings

All settings can be reset to their
default value by choosing

Reset

settings

. Please note that doing a

settings reset will not remove any
snapshots, revert to any previous
software version or remove the
device registration.

Remove all data

All user data and settings can be removed from
the device by pressing

Remove all data

. The

snapshots and device registration will be
removed, and the camera can then be registered
with a new user. Please note that the software
will

not

be reverted to any previous version.

Calibration mode

For periodically checking the accuracy of the
UltraView, a Sonic Tester is sold separately. For
more information, please contact UE Systyems.
For details about the calibration mode, please see
the documentation provided with the Sonic
Tester.

4.7.5 AIR MODE SETTINGS

Please see

section 5: Application-specific features

for the Air mode specific settings.

4.7.6 POWER MODE SETTINGS

Please see

section 5: Application-specific features

for the Power mode specific settings.

Summary of Contents for ULTRAVIEW


































Search results

Summary of Contents for ULTRAVIEW

Reviews:

Related manuals for ULTRAVIEW

Brands by name

Popular brands

UE Systems ULTRAVIEW, Manual

Search results

Summary of Contents for ULTRAVIEW

Reviews:

Related manuals for ULTRAVIEW

Brands by name

Popular brands