5
NOTE:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
1.3 Markings
The physical device ID label, the CE- and the WEEE-
markings are situated on the top left side of the UltraView
(
Image 1
).
The ID label contains the following information: Product
name, ISED certification label, Serial number,
CMIIT ID, Country of origin, Company name and Approval
markings.
The electronic ID-label or e-label containing all the
regulatory information is the primary ID-plate of the
UltraView. The e-label is available from the UltraView user
interface. To open the e-label, press the
Settings
icon
and choose
Device info
.
ISED: The ISED certification label is a word mark
consisting of the Company Number (CN) and the Unique
Product Number (UPN). Serial number: the first four
symbols of the serial number are the model number of the equipment and the last four are the
running identification number:
1.4 Customer help
Do not hesitate to contact our Customer Support Centre if you experience problems or have any
questions about your product. Please include the serial number of the device with your request.
For customer help, go to
1.5 Intended use of the device
The UltraView is a solution for localizing sound sources and analyzing acoustic phenomena in
compressed air systems and power grids.
Serial number
Model number AC13
xxxx Device
Image 1.
Label locations on the UltraView.
CE & WEEE Markings
0
0
ID Label position