BOLT
UDOO BOLT User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by L.V. Copyright © 2019 SECO S.p.A.
20
Independently by the SoC mounted onboard, the following power consumptions are common to all boards:
Battery Backup power consumption:
3.68
μ
A
Soft-Off State power consumption:
TBM
Suspend State power consumption:
TBM
Please consider that the power consumption depends strongly on the utilization scenario.
2.3.3
Power rails naming convention
In all the tables contained in this manual, Power rails are named with the following meaning:
_RUN: Switched voltages, i.e. power rails that are active only when the board is in ACPI
’
s S0 (Working) state. Examples: +3.3V_RUN, +5V_RUN.
_ALW: Always-on voltages, i.e. power rails that are active both in ACPI
’
s S0 (Working), S3 (Standby) and S5 (Soft Off) state. Examples: +5V_ALW, +3.3V_ALW.
_DSW: Deep Sleep Well voltage, i.e. power rails that remain active also when the _ALW voltages have been turned off, in a state very similar to the Mechanical Off
(G3) but with the possibility of awakening of the module upon a very limited set of events. It is not supported by UDOO Bolt firmware, however.
_SUS: unswitched ACPI S3 voltages, i.e. power rails that are active both in ACPI
’
s S0 (Working) and S3 (Standby) state. Examples: +1.5V_SUS
Other suffixes are used for application specific power rails, which are derived from same voltage value of voltage switched rails, if it is not differently stated (for
example, +5V
HDMI
is derived from +5V_RUN, and so on).
Status
SoC V1605B
TDP 12W
TDP 25W
Average (120s)
Peak
Average (120s)
Peak
Idle, power saving configuration
0.345A
0.752A
0.341A
0.635A
OS Boot, power saving configuration
0.797A
1.608A
0.780A
1.899A
Video reproduction@1080p, power saving configuration
0.666A
1.156A
0.593A
1.072A
Video reproduction@4K, power saving configuration
0.847A
1.308A
0.778A
1.424A
Internal Stress Test Tool, package power set at specific TD P
1.293A
1.485A
1.506A
1.943A
