UDO Super Gemini — Owner’s Manual
71
VCA:
This fader controls the amount by which LFO 2 modulates the VCA
level.
When selected as a modulation desination, LFO 2 responds
polyphonically. For example, if you use envelope 1 to modulate
the rate of LFO 2, each time you play a note, the rate of LFO 2 will
be modulated according to the envelope shape. The phase of the
per-voice LFOs can be synchronised again by toggling the leftmost
toggle switch in the performance control section.
Oscillator and Layer Selection
In the destination section you can specify which oscillator to modulate per
layer and select the layer to which you would like to apply the modulation
settings for the bender and LFO 2.
The destination section.
The oscillator selector toggle switch determines which oscillator is affected
by the pitch modulation controlled by horizontal bender movements and
LFO 2. You have the choice between three options:
• DDS 1: With this setting, only the pitch of the first oscillator will be
affected by the bender and LFO 2.
• 1 + 2: With this setting, the pitch of both oscillators will be affected by
the bender and LFO 2.
• DDS 2:
With this setting, only the pitch of the second oscillator will be
affected by the bender and LFO 2.
Summary of Contents for SUPER GEMINI
Page 136: ......
