UD Trucks QUESTER Series, Owner'S Manual

Page: 132 / 244

7.CORRECT DRIVING OPERATION
7-2
Apply parking brake.
1. Shift the gearshift lever to neutral
position.
2. Confirm that the auxiliary brake
switch is moved to the OFF posi-
tion (if equipped).
3. Turn the ignition switch to ON posi-
tion. Wait for 3 seconds to initial-
i z e a l l m e t e r s o n i n s t r u m e n t
cluster before moving to START
position.
4. To start the engine, press the
clutch and brake pedals fully.
Then turn the ignition switch to
the “START” position.
1. LOCK
2. ACC
3. ON
4. START
Stopping the engine
Turn the ignition switch from ON (3)
position to the ACC (2) position, to
stop the engine.
NOTE
Allow the engine to idle for a
s h o r t p e r i o d o f 3 0 s e c o n d s
before stopping it.
CAUTION
If the engine does not stop even
though the ignition switch has
b e e n r e t u r n e d t o t h e A C C
position, move the vehicle to the
nearest place free from traffic,
switch on the hazard lamp and
contact the nearest UD Trucks
authorised dealer to address
this issue.