8
INTRODUCTION
DRAG & DROP MENU BAR
The Uconnect features and services in the main
menu bar are easily changed for your
convenience. Simply follow these steps:
1. Press the Apps button to open the App
screen.
2. Press and hold, then drag the selected App
to replace an existing shortcut in the main
menu bar.
The new app shortcut, that was dragged
down onto the main menu bar, will now be
an active App/shortcut.
NOTE:
This feature is only available if the vehicle is in
PARK.
UCONNECT 4/4C/4C NAV SETTINGS
Press the Apps button on the touchscreen,
then press the Settings button on the
touchscreen to display the menu setting screen.
In this mode, the Uconnect system allows you to
access all of your programmable features.
NOTE:
Depending on the vehicle’s options, available
feature settings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting until a check-mark
appears next to the setting, showing that setting
has been selected. Once the setting is
complete, either press the Back Arrow button
on the touchscreen to return to the previous
menu, or press the X button on the touchscreen
to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the
screen will allow you to toggle up or down
through the available settings.
Refer to “Uconnect Settings” in “Multimedia” in
the Owner’s Manual for further information.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
20_00_U4C8_EN_USC_t.book Page 8
Summary of Contents for 4
Page 115: ......
