14
14. Remove the tension coil spring removed in step 4.
Wire diameter: 1.2mm
Spring diameter: 11.2mm
Wire diameter: 1.2mm
Spring diameter: 9.2mm
15. Install the connection line at the heater connecting terminal.
M4 x 8 cap bolt
(Sems)
Flat washer
φ
4 (small round
)
Tighten it firmly
to prevent a connection fault
16. Install the holder plate.
Insert the slide fixture into
the push nut of the spring pin.
Slide fixture
Link arm
Slide plate
Hold plate
View from
the near side
17. Install the switch panel, front table, and rear table.
M4 x 6
truss machine screw
M4 x 8
set screw
x 2
M4 x 6
truss machine screw
x 4
M4 x 6 pan-head
screw(W sems)
x 2
