Ublox EVK-JODY-W2, User Manual

Page: 25 / 25

EVK-JODY-W2 - User guide
UBX-19027118 - R06 Related documents Page 25 of 25
C1 - Public
Related documents
[1] JODY-W2 series data sheet, UBX-18017567
[2] JODY-W2 system integration manual, UBX-18068879
[3] JODY-W2 level shifter integration application note, UBX-19034257
[4] EVK-JODY-W2 schematics.
[5] Connector for the power jack, terminal connector and power jack
[6] Embedded Linux for i.MX Applications Processors
[7] NXP UM11490 - Feature Configuration Guide for NXP-based Wireless Modules on i.MX 8M Quad
EVK
[8] MCUXpresso Software Development Kit (SDK)
☞
For product change notifications and regular updates of u-blox documentation, register on our
website,
www.u-blox.com .
Revision history
Revision Date Name Comments
R01 16-Jul-2019 aheg Initial release.
R02 18-Oct-2019 aheg Updated some diagrams and schematics based on the new EVK. Updated information
about configuring the bootstrapping options, voltage level jumpers etc. Also updated
the design files as per the latest design. Removed references to SDIO pull-up resistors.
R03 8-Jul-2020 aheg Revised to reflect the latest module board used in the EVK for validating the
engineering sample of the JODY-W2 module. Updated to include the revised
schematics for the C.R2 version of the carrier board.
R04 4-Dec-2020 aheg Added full-sized SDIO adapter in Table 2: EVK-JODY-W2 component list; revised Wi-
Fi host interface in sections 2.3 and 2.4; revised Figure 6 and Figure 18 to show carrier
and module and pig-tail coaxial cable connections with U.FL adapters; removed
obsolete WLAN/BT LED notifications in Table 14; removed resolved issues in known
issues list.
R05 19-Feb-2021 aheg Included changes in the sections 1 and Error! Reference source not found. as per the
Rev. D design of the EVK. Additional power jack to connect with a power jack is
included on the carrier board. Details are explained in section 3.3.
R06 9-Nov-2022 sebs Extended document scope to included JODY-W263-10B reflected in Table 1 . Updated
Software , Power supply configuration , and Control lines . Table 1. Reorganized Kit
description chapter to include Operating conditions . Updated Software and added
Driver source code information. Revised and added additional designator descriptions
in Jumpers and connectors . Updated Host interface for Wi-Fi (3.3 V HS) . Revised EVB
power supply tree with other changes in Power supply configuration section. Added
Selecting the EVB power supply and Bootstrapping sections. Revised Bluetooth host
interface . Added connector information in Control lines section. Included changes in
Antenna interfaces . Added references to the list of related documents and updated
contact information.
Contact
For further support and contact information, visit us at www.u-blox.com/support .