Ublox EVK-JODY-W2, User Manual

Page: 22 / 25

EVK-JODY-W2 - User guide
UBX-19027118 - R06 Contents Page 22 of 25
C1 - Public
Table 13 describes the available radio interfaces of the JODY-W2 module.
Module antenna pin Function
ANT0 2.4 GHz Bluetooth
ANT1 2.4 and 5 GHz Wi-Fi
Table 13: JODY-W2 antenna interfaces
Figure 18 shows the connections for using internal (left) and external (right) antennas.
Figure 18: Connection of pig-tail coaxial cables with the U.FL connectors for internal antennas (left) or SMA connectors
(right).
3.10 LEDs
Table 14 describes the function and description of the available LEDs on the EVK-JODY-W2
evaluation board.
Function Description Designator Color
3V3 Main power supply (VBAT) status indication D402 Green
VIO VIO Supply (1.8 V or 3.3 V) D403 Green
1V8 Aanalog power supply and SDIO (1V8) D404 Green
VDD_3V3 Board voltage to supply for audio codecs, LEDs D405 Green
Table 14: LED Description
Remove jumper J411 for accurate power measurement of the average power in low power sleep
modes. With the jumper removed all LEDs will be off.
Figure 19 : LED selection option
ANT0
ANT1
ANT1
ANT0