EVK-JODY-W2 - User guide
UBX-19027118 - R06
Contents
Page 15 of 25
C1 - Public
Figure 10: EVB power supply tree
☞
The PCIe interface is not supported on JODY-W2 modules.
3.3.1
Selecting the EVB power supply
Use jumpers J104
–
J106 to select the EVB power supply (power mux) for the EVB.
shows
the arrangement of external power supply sources for each jumper position.
Figure 11: External power supply selection, J104-J106
☞
The option for using the PCIe interface is not available in JODY-W2.
VIN_3V3
is the input to the DC-DC converter on the EVB that generates the required voltage rails
(
3V3_DCDC
,
1V8_DCDC
,
3V3_VIO
, and
1V8_VIO
) for the module, as shown in
. A single
jumper is connected between
VIN_3V3
and the chosen voltage supply to the EVB.
