Ublox EVK-JODY-W2, User Manual

Page: 5 / 25

EVK-JODY-W2 - User guide
UBX-19027118 - R06 Contents Page 5 of 25
C1 - Public
1.2 Kit includes
Connectors for the use of different interfaces of the module are included in the evaluation kit.
Table 2 shows the various components included in the EVK-JODY-W2.
Part Description Outline
Evaluation board (EVB) Evaluation board for JODY-W263
series modules. The board includes
SMA antenna connectors that
connect to external antennas for
Wi-Fi and Bluetooth. It has two
internal dual-band Wi-Fi/Bluetooth
antennas.
Level shifter with micro
SDIO ZIF adapter and
flat cable SDIO level shifter to be used if the
host only supports a 3.3 V interface
voltage (High Speed Mode).
Micro SDIO ZIF adapter
and flat cable. Micro SDIO adapter for Wi-Fi and/or
Bluetooth host communication. The
adapter is compatible with host
sockets designed for micro-SD
memory cards.
Full-size SDIO adapter SDIO adapter for Wi-Fi (optionally
Bluetooth) host communication. The
adapter is compatible with host
sockets designed for full-size SD
memory cards.
Type-C USB cable Type-C USB cable for Bluetooth host
communication over UART
connected through FTDI.
External Antennas (2) Dual band Wi-Fi/Bluetooth antenna,
Linx Technologies
ANT-DB1-RAF-SMA
Table 2: EVK-JODY-W2 component list