28
Chapter 10: Access Point Details
UniFi
™
AP-Outdoor User Guide
Ubiquiti Networks, Inc.
Downlinks
Displays which wireless Access Points are currently
connected to the wired Access Point. Includes details
such as the downlink Access Point (by specified name or
MAC address), signal strength, and the option to remove
the wireless Access Point from the wired Access Point by
clicking
remove
.
Note:
Downlinks
will only be visible under
the
Details
tab when a wireless Access Point
is connected.
Radio (11n/b/g)
Click
Radio (11n/b/g)
to display the channel and transmit/
receive statistics.
Channel
Displays the wireless channel being used.
Transmit Power
Displays the EIRP in dBm.
Note:
If the device has an external antenna,
you can place the mouse over the icon for
additional details.
TX Pkts / Bytes
Displays the number of packets and total
bytes transmitted by the Access Point.
RX Pkts / Bytes
Displays the number of packets and total
bytes received by the Access Point.
TX Retry / Dropped
Displays the percentage of
transmitted packets that needed to be resent and the
percentage of packets that were dropped.
RX Error / Dropped
Displays the percentage of packets
received that needed to be resent and the percentage of
packets that were dropped.
# Users
Displays the number of users connected to the
primary network.
# Guests
Displays the number of users connected to the
guest network.
Users
Name
Displays the name (MAC address if not defined) of
users connected to the primary network of the selected
Access Point. You can click the links under
Name
to display
additional details of each user (see
“User/Guest Details”
on page 35
for more information).
WLAN
Displays the name of the SSID (network name) of
the wireless LAN (WLAN) that the user is connected to.
Actions
Select from one of the following actions:
•
Block
Click this button to block a specific user from
accessing the Access Point. This will add the client to the
Blocked Device list.
•
Reconnect
Click this button to reconnect a specific user
to the Access Point.
