3
Chapter 1: Overview
TOUGHSwitch
™
PoE User Guide
Ubiquiti Networks, Inc.
TOUGHSwitch PoE PRO
Back Panel
Power
Ventilation Holes
Note:
There are additional ventilation holes on the
top and sides of the TOUGHSwitch.
Front Panel Ports
Management
USB
Reset
1-8
Interface
Description
Management
10/100 Mbps port for management. Traffic between
the
Management
port and numbered ports will
be limited to 10/100 Mbps and, under heavy
load, may cause performance degradation of the
TOUGHSwitch.
USB
Reserved for future use.
1-8
10/100/1000 Mbps ports for switching and PoE (also
available for management by default).
Reset
To reset to factory defaults, press and hold the
Reset
button for more than 10 seconds while the unit is
already powered on.
Front Panel LEDs
Power/Link
PoE
Speed/Link/Act
LED
State
Status
M
anagement
Power/
Link
Off
No Power/No Link
Amber
After bootup, the LED indicates
power. After an initial link is
established, the LED indicates a
10/100 Mbps connection. If the
link terminates, the LED turns
off until a link is re-established.
If the unit reboots, the LED will
again indicate power until a link is
established.
1-8
PoE
Off
No Power over Ethernet
Green
24V Power over Ethernet
Amber
48V Power over Ethernet
Speed/
Link/Act
Off
No link
Amber
Link established at 10/100 Mbps
Amber Flashing
Link activity at 10/100 Mbps
Green
Link established at 1000 Mbps
Green Flashing
Link activity at 1000 Mbps
