7
Chapter 2: Installation
TOUGHSwitch
™
PoE User Guide
Ubiquiti Networks, Inc.
Connecting Power
1. Connect the power connector of the
Power Adapter
to
the
Power
port of the TOUGHSwitch.
2. Connect the
Power Cord
to the power port on the
Power Adapter
. Connect the other end of the
Power
Cord to a power outlet.
Connecting Ethernet
1. Connect an Ethernet cable from the Ethernet port
of your computer to the
Management
port of the
TOUGHSwitch.
2. Connect Ethernet cables from the Ethernet ports
of your devices to the numbered ports of the
TOUGHSwitch.
Note:
PoE
is disabled by default on all numbered
ports and is not available on the
Management
port.
To enable
PoE
on the appropriate ports, use the
Ports
tab in the Configuration Interface (see
“PoE” on
page 24
).
