Ubiquiti airFiber 24, User Manual

Page: 47 / 68

43
Chapter 8: System Tab airFiber AF-24/AF-24HD User Guide
Ubiquiti Networks, Inc.
Location
After the on-board GPS determines the location of the
airFiber AF-24, its latitude and longitude are displayed.
If the GPS does not have a fix on its location, then
“Searching for Satellites” will be displayed.
Latitude
The latitude of the airFiber AF-24’s location is
displayed.
Longitude The longitude of the airFiber AF-24’s location
is displayed.
Device Maintenance
The controls in this section manage the airFiber AF-24
maintenance routines.
Reboot Device Initiates a full reboot cycle of the airFiber
AF-24. Reboot is the same as the hardware reboot, which
is similar to the power-off and power-on cycle. The system
configuration stays the same after the reboot cycle
completes. Any changes that have not been applied are
lost.
After the airFiber AF-24 reboots, the settings of the new
configuration are displayed in the
Wireless , Network ,
Advanced , Services , and System tabs of the airFiber
Configuration Interface.
Reset to Factory Defaults
Click this option to reset the
airFiber AF-24 to the factory default settings. This option
will reboot the airFiber AF-24, and all factory default
settings will be restored. We recommend that you back
up your current system configuration before resetting the
airFiber AF-24 to its defaults.
Back Up Configuration Click this option to download the
current system configuration file.
The airFiber AF-24 configuration is stored in a plain text
file (.cfg file). You can back up, restore, or update the
system configuration file:
Upload Configuration Click this option to locate the
new configuration file. Select the file and click Open .
We recommend that you back up your current system
configuration before uploading the new configuration.
Download Support Info This generates a support
information file that the Ubiquiti support engineers can
use when providing customer support. This file only needs
to be generated at their request.