UBI EasyCoder 201 IIE
UBI EasyPak 71 – Getting Started
5
0 I
Power Switch
Voltage Sign
Transformer
CONNECT POWER CORD
❏
Make sure that the transformer is set for correct volt-
age by checking the voltage sign on top.
❏
First, fit the round connector into the power inlet on
the printer’s rear plate. Then, connect the other cord
to a wall socket.
❏
The power can be turned ON/OFF by means of the
main switch beside the power inlet. The "Power"
control lamp lights red when the power is on.
CONNECT INTERFACE CABLE
❏
Before connecting an interface cable, please make
sure that both computer and printer are turned OFF.
❏
For
Windows
programs — use
parallel
interface
cable
Connect the parallel interface cable to the connector
on the back of the printer and secure it with the
clips attached to the cable connector. Connect the
other end of the parallel interface cable to the PC
parallel interface and fasten the cable with the
screws attached to the cable connector.
❏
Turn the printer ON!
0 I
Parallel Interface
Connectors (Centronics)
Power Inlet
