50
Web User Interface
SAs.
Identity
The value of corresponding to selected Identity type.
Remote endpoint
settings
Define the local network that will be protected by IPSec
VPN, located in peer wireless router LAN side.
Address group type
Define the local address type,
-
IP Subnet, to protect the whole subnet.
-
Single IP address, to protect a single PC
-
IP address range, to protect several PCs
Subnet Subnet
scale.
Mask
Subnet mask value.
Identity type
Select different identity type to identity this wireless router
by
-
WAN IP address
-
IP
address
-
FQDN
-
address
Identity
The value of corresponding to selected Identity type.
Network address type
Filled in with the IP address or Domain name of the peer
IPSec VPN Gateway, you can select
-
IP address, usually suitable for static public IP address.
-
Fully Qualified Domain Name (FQDN), usually suitable
for dynamic public IP address.
Remote address
Input IP address value when choose IP address in Network
address type. Input FQDN value when selected FQDN in
Network address type. This filed is used to identify specific
remote IPSec VPN gateway which your wireless router will
initiate IPSec VPN connection to.
IPSec settings
Configure the IPSec Protocol related parameters
Pre-shared Key
Type your pre-shared key in this field. A pre-shared key
identifies a
communicating party during a phase 1 IKE negotiation. It is
called "pre-shared" because you have to share it with
another party before you can communicate with them over a
secure connection.
Phase 1 DH group
Select which Diffie-Hellman key group (DH
x
) you want to
use for encryption keys. Choices are:
U10C019/U10C020