46
Web User Interface
select Enable or Disable.
Configure
Click Configure to make the L2TP/PPTP setting to take
effect.
IPSec Endpoint
Select to disable or enable IPSec VPN service.
#
ID of the IPSec VPN tunnel.
Name
Identical name of IPSec VPN tunnel
Status
Once an IPSec VPN is connected successfully, Status will
turn to be connected. Otherwise, it shows Not Connected.
Control
User can manually trigger IPSec VPN connection request to
the remote VPN gateway.
Configure
Click Edit to modify IPSec VPN parameters of this tunnel;
Click Delete to delete this IPSec VPN tunnel.
Add New Tunnel
Click to quickly create a new IPSec VPN tunnel, and then to
modify its parameters.
6.4.3 VPN- Configure
Internet protocol Security (IPSec) is a standard based VPN that offers flexible solutions for
secure data communications across a public network like the Internet. IPSec is built around a
number of standardized cryptographic techniques to provide confidentiality, data integrity and
authentication at the IP layer.
A VPN tunnel is usually established in two phases. Each phase establishes a security
association (SA), a contract indicating what security parameters wireless router and the
remote IPSec router will use. The first phase establishes an Internet Key Exchange (IKE) SA
between wireless router and remote IPSec router. The second phase uses the IKE SA to
securely establish an IPSec SA through which the wireless router and remote IPSec router
can send data between computers on the local network and remote network.
Before IPSec VPN configuration, you will be involved with such terms like IPSec Algorithms,
Authentication Header and ESP protocol.
IPSec Algorithms
U10C019/U10C020
