Ubee Interactive
Using the Wireless Radio Option
Ubee DDW366 Dual-Band Concurrent Advanced Wireless Gateway Subscriber User Guide • February 2014
69
9.1.1
Scanning for Wireless Access Points (APs)
You can search for wireless access points and display the results in a new window.
Steps
To search for wireless access points:
1. Click
Scan Wireless APs
at the bottom of the Wireless Radio screen. Results are
displayed in a new window.
2. Click
Refresh
to update the results.
Control Channel
Selects a specific channel to deploy the wireless network.
This allows you to set the operating frequency/channel
depending on your particular region. Channel selection can
have an impact on wireless networking performance. Control
Channel is set to
Auto
by default. For more information, refer
to
Selecting a Wireless Channel on page 86
Regulatory Mode
Defines whether Regulatory Mode is set to off, 802.11d, or
802.11h.
TPC Mitigation (dB)
Defines the transmitter power control (TPC) mitigation setting
as 0 (off), 2, 3, or 4.
OBSS Coexistence
Enables or disables overlapping BSS coexistence.
STBC Tx
Sets the space-time block codes (STBCs) for the transmitting
antenna.
Apply
Saves all screen changes when clicked.
Restore Wireless Defaults
Restores the factory default settings for wireless
configurations when clicked.
Scan Wireless APs
Scans for other wireless access points and displays channel,
encryption, SSID, RSSI levels, and other information.
Label
Description
