Ubee Interactive
Using the Diagnostics Option
Ubee DDW366 Dual-Band Concurrent Advanced Wireless Gateway Subscriber User Guide • February 2014
26
4.4.1
Using the Ping Option
Use the
Ping
utility to test network connectivity between devices by sending a test
message to a specific device. You can also confirm that the size of data sent is the same
as the size of data received.
Steps
To test connectivity between devices:
1. Click
Status
from main menu.
1. Click
Diagnostics
from the left side menu.
2. Choose
Ping
from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click
Start Test
. Field descriptions are listed below the screen example.
Label
Description
Utility
Provides a drop-down menu to choose Ping or Traceroute.
Target
Defines the IP address to which you want to send a ping.
Ping Size
Defines the packet size (bytes of data) to send for the ping
operation. Default is 64.
No. of Pings
Defines the number of ping commands to send to the ping
target. Default is 3 pings.