79
SPECIAL TOOLS AND APPLIANCES
New automobiles delivered from the manufacturing plant are
provided with a set of tools and appliances. Use this set for
maintenance and simple repair of the automobile en route.For
convenience of storage, there are two tool bags in the automo-
bile: a big and a small one.
Use a plunger grease gun
(Fig. 69) for lubricating the
automobile assemblies provided with nipples.
For lubricating, pull the handle 12 until the stud 13 touches
the piston 7; by rotating the handle insert the stud through slot
of the piston and by rotating the handle lock the stud in the
piston, fit the head 1 over a nipple. When rocking the lever 8,
press the handle 12.
Fig. 69. Grease plunger gun:
1 -head; 2 -spring; 3 -ball valve; 4 -body; 5 -plunger; 6 -gasket; 7 -piston;
8 -lever; 9 - gun cylinder; 10 -rod; 11 - cover; 12 -handle; 13 -stud
Fill the gun with grease in the following sequence:
1. Screw the cylinder 9 out of the body 4.
2. Pull the piston 7 inside of the cylinder through 1/5 of
strokes by means of the handle 12.
3. Using a wood spatel, fill the gun cylinder with grease.
Then press the pistion against the stop and fill the whole cylinder
with grease. Make sure, there are no air bubbles in the cylinder.
The gun fails to be operated if air would find its way into the
chamber B.
For deaerating, unscrew the bolt of the cylinder C, press the
gun handle until grease is emerged and tighten the bolt.
The capacity of the chamber B is 340 cm
3
of grease.
Summary of Contents for 2001 ???-2206
Page 93: ...93 Fig 77 Lubrication and tank chart of automobile ...
Page 106: ...FOR NOTES ...
