UAZ 2001 ???-2206, Instruction Manual

Page: 4 / 112

4
4. When descending a steep downhill:
- do not shut down the engine to avoid loss of the efficiency of
the brakes provided with the vacuum booster;
- do not disengage the clutch to avoid breaking of the clutch
driven disk.
5. When riding on dry hard-surface roads, disengage the front
axle. When the front wheels are disengaged, never engage the front axle.
6. If one of the hydraulic brake circuits is a failure, the travel
of the brake pedal is increased, and the braking efficiency is
decreased.
7. When using the gun with the unscrewed tip, take out the spring
and the ball in order to avoid their falling in the assemblies with
liquid grease.
8. Avoid falling acides, soda solutions, braking fluids, antifreeze
and fuel on the painted surfaces of the body and rubber parts.
9. Do not allow impact loads on the chassis of the automobile.
When a strong impact of the front wheels is occured, inspect
carefully the wheels, all parts of the front axle, steering rods,
steering mechanism, oil sump, eliminate deffects, if required.
10. To avoid heavy loads on the axle differential, do not allow
a prolonged slipping.
11. Use the warmth-keeping hood for radiator shell to provide
the proper temperature condition for engine at an ambient tempera-
ture below 0 °C.
12. When the automobile is to be operated at a temperature
below -30 °C, do not fail to disengage the front axle.
13. The automobile is provided with a towing hook allowing a
short-time operation with a trailer. Do not tow a trailer on rugged
ground.
14. Do not transport at the same time passengers and cargoes
(except for a hand luggage) in the passenger and the sanitary
compartments of the automobiles ÓÀÇ-2206, ÓÀÇ-3909,
ÓÀÇ-3962, in the cargo compartment of the automobile ÓÀÇ-3741
equipped with the hinged seats, on the platform of the automobiles
ÓÀÇ-3303, ÓÀÇ-33036, ÓÀÇ-39094, ÓÀÇ-39095 equipped with
the hinged seats and the tarpaulin.
The automobile design is provided with special parts to fasten cargoes.
15. Since efforts are continually made to improve the reliability
and performance of the automobiles, minor changes may be
introduced without special notices.