UAV-1004270-001
29
Rev A
7.7 Unit Installation
The tailBeaconX unit must be electrically connected, then installed into the
Mounting Plate by aligning the mounting tabs on the tailBeaconX with the
cut-outs in the Mounting Plate. This requires you to rotate the unit 5º
Counter-Clockwise from vertical before inserting. Once inserted gently,
rotate Clockwise to vertical and secure with M2 anti-rotation screws.
DO NOT FORCE ROTATION; tailBeaconX should rotate with little
resistance.
1. Insert tailBeaconX into the Mounting Plate and twist clockwise to the
vertical position.
!
