UAV-1003599-001
4
Rev A
2 Warnings / Disclaimers
All device operational procedures must be learned on the ground.
uAvionix is not liable for damages arising from the use or misuse of this
product.
This equipment is classified by the United States Department of
Commerce's Bureau of Industry and Security (BIS) as Export Control
Classification Number (ECCN) 7A994.
These items are controlled by the U.S. Government and authorized for
export only to the country of ultimate destination for use by the ultimate
consignee or end-user(s) herein identified. They may not be resold,
transferred, or otherwise disposed of, to any other country or to any person
other than the authorized ultimate consignee or end-user(s), either in their
original form or after being incorporated into other items, without first
obtaining approval from the U.S. government or as otherwise authorized by
U.S. law and regulations.
DO NOT FORCE ROTATION; tailBeaconX should rotate with little
resistance.
DO NOT connect the tailBeaconX to any high voltage sources.
Safe operating voltage range is 14-28 volts DC.
Ensure that the tailBeaconX is oriented consistent with the
installation direction indication on the labels. This ensures the
GPS antenna is correctly oriented skyward.
Refer to the Aircraft
Manufacturer's Service Manual to determine if
control surface balancing is required and for balancing
instructions.
Never hit, tap on, or flex the fin portions the tailBeaconX
assembly. Doing so will cause undue stress and could void your
warranty.
tailBeaconX must be enabled, typically in ALT mode, during all
phases of flight including surface movement operations.
!
!
!
!
!
!
