SKU 66974
For technical questions, please call 1-800-444-3353.
Page 9
but the output will not exceed the
tool’s maximum air pressure at any
time. Turn the knob clockwise to in-
crease pressure or counter-clockwise
to decrease pressure. Adjust the
pressure gradually, while checking
the Tool Pressure Gauge (35) to set
the desired pressure range.
The Air Compressor will cycle up to
8.
100 PSI before shutting off. It will
start to build pressure again when the
air pressure in the air tank drops to
58 PSI.
After the job is complete, move the
9.
On/Off Lever (36) to the OFF posi
-
tion.
Open the Drain Valve (43) to release
10.
pressure. Squeeze the Trigger of the
air tool to release pressure from the
line.
Disconnect the air hose and tool.
11.
To prevent accidents, disconnect its
12.
power supply after use. Clean, then
store the tool indoors out of children’s
reach.
