SKU 66974
For technical questions, please call 1-800-444-3353.
Page 8
Components and Controls
oPerating inStruCtionS
read the entire imPortant
SaFety inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to PreVent
SeriouS injury
From aCCidental
oPeration:
turn the on/off lever of the
Compressor to its “oFF”
position, pull the Safety Valve
to release excess pressure in
the tank, and unplug the
Compressor from its electrical
outlet before preparing for
operation.
Connect an air hose (sold separately)
1.
to the Quick Coupler (41). The air
hose must be rated to the intended
PSI and must be long enough to
reach the work area with enough
extra length to allow free movement
while working.
Pull the Safety Valve to make sure
2.
there is no residual pressure in the
tank.
Following the tool manufacturer’s in-
3.
structions, connect the tool assembly
(sold separately) to the air hose and
close the in-line safety valve (part of
tool assembly) between the compres-
sor and the tool.
Plug the Compressor Power Cord
4.
into a grounded 120 V electrical
outlet. Do not use an extension cord
with this product.
Turn on the On/Off Lever (36).
5.
Allow the Air Compressor to build up
6.
pressure until it cycles off.
Adjust the air compressor’s Pressure
7.
Regulator (40) so that the air output
is enough to properly power the tool,
Quick
Coupler
(41)
gauges and Controls:
Gauges
and
Controls
Drain V
alve (43)
Handle
On/Off
Lever
(36)
Tool
Pressure
Gauge
(35)
Tank
Pressure
Gauge
(56)
Pressure
Regulator
(40)
Figure 1
Safety
Valve
(37)
