PAGE 3 OF 12
0421 IH-5552
NOTE: Do not tighten bolts until unit is completely
assembled. NOTE: Do not tighten bolts until unit is
completely assembled.
1. Place back panel (1) on a protected flat surface so
that the flanges face upward.
2. Bolt side panel (2) to back panel, making sure side
panel fits within the flange of the back panel.
(See Figure 1) The ends of the back and side panels
with the two large holes are at the bottom of the
locker.
NOTE: Do not put nuts and bolts in bottom three
holes on outside corners of locker, as those will
be used later to attach legs.
3. Bolt top (3) and bottom (3) to back panel (1) and left
panel (2). Bolt shelves (4) to left and back panels,
spaced evenly apart. (See Figure 2)
4. Bolt right side panel (2) to the back panel (1). Attach
right side panel to top, bottom and shelves.
(See Figure 3)
ASSEMBLY
2
Top
1
Back Panel
Left Side Panel
Figure 1
3
2
1
4
3
Figure 2
2
Figure 3
