PAGE 5 OF 8
1214 IH-2289
Printing Data
Printing the displayed data to a printer or sending the
data to a computer requires that the communication
parameters in the Print and Communication Menu are set.
1. Press the PRINT UNITS button to send the displayed
data to the communication port (the Auto-Print
Mode function must be off).
aPPliCatiOn mODes
1. Press and hold the FUNCTION MODE button until the
desired application mode appears. Only modes
enabled in the mode menu will be displayed.
weighing
Place the item to be weighed on
the scale. The illustration indicates a
sample of 1.5 kg (gross weight).
nOte: Press the
FUNCTION
MODE
button to temporarily
display the weight in 10x
expanded resolution.
Parts COunting
Use this mode to count parts of uniform
weight. The Indicator determines the
quantity based on the average weight
of a single part. All parts must be
uniform in weight for accurate measurements.
average PieCe weight (aPw)
When the FUNCTION MODE button is
released, CLr.PW Pcs is displayed.
CLEARING A STORED APW
1. Press the YES button to clear the stored APW.
RECALLING A STORED APW
1. Press the NO button to recall the existing APW.
nOte: Press the
FUNCTION
MODE
button to temporarily
display the aPw value.
2. The display shows the sample size
PUt 10Pcs.
ESTABLISHING A NEW APW
1. Press the NO button to increment
the sample size. Choices are 5, 10,
20, 50 and 100.
2. To establish the APW, place the specified quantity
of samples on the scale and press the FUNCTION
MODE button to capture the weight.
3. APW is displayed shortly followed
by the APW value with the current
unit of measure.
BEGIN COUNTING
1. Place the parts on the scale and
read the count. If a container is
used, be sure to tare the empty
container first.
PerCent weighing
Use this mode to measure the weight
of a sample as a percentage of a
reference weight.
referenCe weight
When the FUNCTION MODE button is
released, CLr.rEF% is displayed.
CLEARING A STORED REFERENCE WEIGHT
1. Press the YES button to clear the stored reference
weight.
RECALLING A STORED REFERENCE WEIGHT
1. Press the NO button to recall the existing reference
weight.
nOte: Press the
FUNCTION
MODE
button to temporarily
display the reference weight.
OPeratiOn COntinueD
WEIGH
COUNt
. 1.500
kg
. 1.5000
kg
0.123
kg
0.123
kg
PErCNt
CLr.rEF
%
APW
Pcs
AP
Pcs
